travis half round 1.jpg
travis_half_round_2.jpg
aluminum_end_dump_for_sale.jpg
travis_aluminum_half_round.jpg
travis_half_round_2.jpg
alumatech_end_dump.jpg
alumin_end_dump.jpg
aluminum_end_dump.jpg
travis half round 1.jpg
travis_half_round_2.jpg
aluminum_end_dump_for_sale.jpg
travis_aluminum_half_round.jpg
travis_half_round_2.jpg
alumatech_end_dump.jpg
alumin_end_dump.jpg
aluminum_end_dump.jpg

Travis Alumatech® – Aluminum Half-Round End Dump

$81,900.00

The Travis Alumatech® is one of the most respected aluminum end dumps in the industry — praised for its exceptional strength-to-weight ratio, seamless half-round construction, and clean-dumping performance. Unlike traditional multi-panel aluminum bodies, the Alumatech is built from a single, smooth, one-piece sheet, giving it unmatched structural integrity and a polished, high-end appearance.

This 39' configuration delivers a rare combination of high capacity, low tare weight, and long-term durability, making it a top choice for aggregate haulers, asphalt contractors, demolition fleets, and high-volume bulk operations across West Texas and beyond.

Premium Half-Round Design

The Alumatech’s seamless half-round body eliminates center welds and internal angles, allowing material to flow freely and unload cleanly at lower dump angles. This reduces rollover risk, prevents hang-ups, and speeds up cycle times in pits, plants, landfills, and job sites.

Its curved geometry naturally centers the load, improving stability and reducing stress on the trailer structure — especially when loading rock, millings, and heavy aggregates.

The Travis Alumatech® is one of the most respected aluminum end dumps in the industry — praised for its exceptional strength-to-weight ratio, seamless half-round construction, and clean-dumping performance. Unlike traditional multi-panel aluminum bodies, the Alumatech is built from a single, smooth, one-piece sheet, giving it unmatched structural integrity and a polished, high-end appearance.

This 39' configuration delivers a rare combination of high capacity, low tare weight, and long-term durability, making it a top choice for aggregate haulers, asphalt contractors, demolition fleets, and high-volume bulk operations across West Texas and beyond.

Premium Half-Round Design

The Alumatech’s seamless half-round body eliminates center welds and internal angles, allowing material to flow freely and unload cleanly at lower dump angles. This reduces rollover risk, prevents hang-ups, and speeds up cycle times in pits, plants, landfills, and job sites.

Its curved geometry naturally centers the load, improving stability and reducing stress on the trailer structure — especially when loading rock, millings, and heavy aggregates.

Ultra-Lightweight Build for Maximum Payload

With an approximate tare weight under 9,000 lbs in this configuration, the Alumatech is purpose-built for operators who measure their success in payload. The reduced weight translates directly to:

  • More material per load

  • Faster scaling

  • Lower fuel consumption

  • Increased revenue per day

The all-aluminum subframe and extensive use of 5454 and 6061-T6 alloys deliver long-term corrosion resistance while maintaining impressive structural strength.

High-Capacity 39' Tub (57" Sides)

This trailer delivers excellent volume without compromising stability.
Approximate Capacity: 41.4 cubic yards with 57" sides.

Ideal for hauling:

  • Sand and gravel

  • Rock and aggregates

  • Asphalt and millings

  • Clay, dirt, and caliche

  • Demolition debris

  • Agricultural bulk

Durable, Purpose-Built Construction

Body

  • Seamless one-piece aluminum tub

  • 3/16" (.190) polished sidewalls

  • 1/4" (.250) aluminum floor and nose

  • Heavy-duty 10" × 6" shedding top rail

  • Triangular interlocking quarter rail

  • Reinforced tailgate frame with 5" × 4" aluminum tubes

Tailgate

  • Over-center gate latches

  • 12° overslung hinge

  • Replaceable rubber snap-in gate seal

  • Air-operated from front of subframe

Chassis & Running Gear

  • INTRAAX® air ride suspension (50,000 lb)

  • All-aluminum subframe (Travis exclusive)

  • Hub-piloted Duralite hubs

  • Outboard X30 lightweight drums

  • 16.5" × 7" premium brakes

  • WABCO ABS

  • Aluminum wheels (4 polished / 4 mill)

  • 14-ply radial tires

  • External 5-stage telescopic hoist

  • Aluminum draft arms with drop legs

  • T-1 steel coupler plate with upgraded 5" saddles

Lighting & Safety

  • LED marker and signal lights

  • LED side turn signal

  • Dual LED stop/turn/tail

  • Sealed wiring harness

  • Roadside rear ladder

Modern Engineering Improvements

The current Alumatech generation includes significant structural upgrades:

  • A lengthened, strengthened front subframe

  • Reinforced draft arm connection

  • Stronger T-1 coupler plate and enlarged saddles

  • Updated tailgate hanger design

  • Protected tailgate cylinder placement

  • Heavier hoist support channels with extruded ¾" sections

  • Redesigned nose/rail connection for improved longevity

These refinements give the Alumatech greater long-term durability in demanding environments — especially in oilfield and aggregate operations.

Available Options

  • 60" or 63" side heights

  • UHMW/HMW liners

  • Side-roll or flip tarps

  • Grain door

  • Short apron or no apron

  • Load-bearing drop legs

  • 2-speed landing gear

  • Extra lighting packages

  • Wide-base tires or wheels

  • Tire inflation systems

Perfectly Suited for West Texas Hauling

This Alumatech configuration is ideal for the working conditions surrounding Amarillo, Lubbock, Odessa, and the entire Permian Basin. With its low tare weight, seamless design, and rugged structural upgrades, it excels in:

  • Long-haul aggregate routes

  • Pit-to-plant cycles

  • Hot mix and millings

  • Oilfield pad construction

  • Landfill and waste hauling

  • High-abrasion material operations

Its combination of strength, light weight, and clean-dumping performance offers an immediate advantage to fleets looking to maximize operational efficiency and minimize downtime.